If you’ve been to the Builders’ Show, the Remodeling Show, or JLC Live, you’ve likely crossed paths with longtime carpenter Mike Sloggatt. Armed with a headset and a career’s worth of knowledge, Sloggatt, owner of Mike Sloggatt Home Improvement, delivers compelling presentations on siding and trim installation focused on ensuring quality exteriors that stand the test of time.
Among the materials Sloggatt installs during workshops is Boral TruExterior Siding & Trim. “TruExterior is virtually indestructible in terms of water, insects, and holding paint,” Sloggatt says. “But don’t get lazy—install it properly, and it will treat you really well.”
Along with the installation techniques provided by Boral, here are a few of Sloggatt’s best practices and quick tips for installing TruExterior Trim to ensure a quality—and efficient—installation:
- Stay organized: Thoughtful setup of materials ahead of time can save you steps over the course of the day. Sloggatt, for example, sets up his cutting station and always works from the same direction—pulling a piece off the stack to the left, cutting, and stacking to the right for installation. To help keep the cutting space clean, he puts a canopy over the saw with a garbage bag behind it for easy disposal of scraps, and he keeps a small battery-powered leaf blower nearby to blow away dust and keep his tooling clean so it will last longer.
- Use the right tooling: TruExterior offers the workability of wood, which allows it to be routed and shaped into a range of decorative profiles. It does, however, require carbide blades and bits, and it can be difficult to cut wood once those blades and bits have been used for the poly-ash material. Sloggatt designates bits and blades specifically for TruExterior, marking them with blue spray paint. This ensures the tooling will last longer and eliminates any frustration that may result from trying to cut other materials after TruExterior.
- Understand your materials and think of the system: When Sloggatt first started building 40 years ago, resilient old-growth timber was common for framing—and much more forgiving. Today’s wood materials need to be better protected from moisture and managed as a system. How well the window is trimmed, flashed, and integrated with the weather-resistive barrier can impact the integrity of the wood framing underneath as well as the trim above.
- Store properly: TruExterior offers superior dimensional stability compared to most materials, but every product is prone to some movement if exposed to the right conditions. As with any trim material, keep TruExterior off the ground and covered during storage so that it won’t risk being installed wet. Once installed, TruExterior can be in contact with the ground with no concerns about excess moisture absorption.
- Avoid flashed nail holes: One challenge every installer has likely faced is driving a fastener into painted trim and filling the hole, only to leave a noticeable flash behind. To avoid this, Sloggatt puts a small bit of blue painter’s tape over the spot before driving the fastener, then fills the hole with the tape still in place. This ensures the hole is filled but not the surrounding material, eliminating the glare of a flashed hole.
Want to learn more about TuExterior installation? Download the installation guide here.