5 Best Practices for Going Bold With Exterior Color

Kleer trim

When used well, bold colors can add a tasteful pop of life to a home’s exterior. When used poorly, you can end up attracting negative attention.

Here are five tips from Trisha Wagner, senior product manager and an authority on color at Boral Building Products, to ensure your use of bold is gorgeous, not gaudy.

1. The best place for bold color is in a home’s decorative details
While it always depends on the house, bold colors are generally best used in a home’s accents, such as the shutters and front door. It’s one of the fastest ways to have a large impact and can completely transform a home’s look and feel. Even better, these details are often the easiest—and most affordable—to change later with either a fresh coat of paint or replacement.

Kleer trim bold colors

2. Remember to coordinate
One of the first things to consider when picking bold accents is the home’s siding color. You want to select accent colors, such as on the trim, shutters, and front door, that work well with the siding, so consult the color wheel for reference. As explained on Color Matters, “color harmony” can be achieved by choosing analogous colors (three colors side by side on the wheel) or complementary colors (directly opposite each other on the wheel). This can be especially helpful in moving beyond traditional colors. For example, instead of the typical pale yellow, try a deep maize yellow paired with red, coral, or cobalt accents.

3. Pay attention to the entire home exterior
The front of the home isn’t the only area people see. Don’t forget to decorate the back and sides of a house, particularly since outdoor living is more important to buyers than ever before. A bare side or rear home exterior looks and feels unfinished; shutters and accents on these walls will add dimension and complete the look.

4. Find what works for you
If clients are uncertain about incorporating bolder colors, encourage them to experiment with different tones before making their final selection. If a home’s style doesn’t support shutters, consider using just a bold trim color. You can also soften a home’s look by pairing white or cream trim with one or two bold accents. For a less-permanent option,  incorporate bold colors into the landscape design, such as bright-red or -purple flowers and plants, a jewel-toned bird bath, or even a painted fence.

TruuExterior trim bold colors
White can be a bold choice against a neutral cladding.

5. Don’t discount the power of white
In the sea of tans and beiges that dominate today’s exteriors, white becomes a stark contrast that is a bold choice in and of itself. A crisp white trim against a richer-toned cladding is eye-catching and stands out from homes with cream accents.

For more design inspiration, visit www.kleerlumber.com and www.truexterior.com

4 Best Practices for Beautiful Siding Installation

Professionals know it’s not only the quality of the product that determines how polished a home’s siding looks, but also how well it is installed.

While having on-site experience can develop the skills for top-notch installation, sometimes even the most experienced builders make mistakes. Here are four tips to ensure your Grayne and Foundry siding projects are beautiful every time.

1. Use the Right Tools
Before you begin the installation process, it’s essential to be equipped with the right tools. Accidentally using the wrong tools can have consequences.

To cut the siding, use either a vinyl siding blade or a fine-toothed blade. If using a fine-toothed blade, be sure to install the blade in reverse for the best cuts.

Other tools to include on your checklist:
• Utility knife
• Caulking gun (to seal J-channel)
• Vinyl siding snips (to cut or trim siding panels)
• Siding removal tool
• Snap lock punch (to cut snap lock tabs and allow cut panels to be snapped into utility trim)
• Nail hole slot punch (to add nail holes if a panel must be face nailed)
• Trim nail punch (to add nailing holes if a panel must be face nailed)

2. Start with a Smooth Surface
If the surface beneath the siding is uneven, even the best siding installation may be compromised. Take appropriate precautions to ensure a smooth, continuous surface.

For new construction, avoid using green lumber as the underlayment, as it typically has high levels of moisture. As the wood dries, it will shrink, leading to cracking and warping. These flaws in the wood can make the siding look uneven and poorly installed.

If you are re-siding a building, furring or complete removal of uneven original siding may be required to create a smooth surface. While this process may seem like a nuisance, it will help to ensure straight, stable replacement siding.

3. Plan for Expansion and Contraction
To accommodate expansion, see siding manufacturers’ guidelines, as many panels install differently.

Always leave a minimum of 1/8″ gap at the nailing hem to accommodate changes from temperature shifts. If you’re installing siding in temperatures of 75 degrees F or higher, lessen the clearance slightly to at least a 1/16″.

vinyl siding installation panel spacing

4. Apply Panels Correctly
One of the most common mistakes installers make when applying panels is driving the head of the fastener tightly against the nail hem. Allow approximately 1/32″ (roughly the thickness of a dime) clearance between the fastener head and the siding nail hem.

During installation, avoid face-nailing or stapling through siding. Face-nailing can not only cause ripples in the siding, but also prevents proper expansion and contraction.

When installing a siding panel, push up from the bottom until the lock engages, then let the panel relax down against the ledge of the previously installed panel. Without stretching the panel, reach up and fasten it into place. Again, be wary of tightness—the panels should not be under tension or compression when they are fastened. Once fastened, allow the butt edge to rest on the top edge of the course below.

vinyl siding installation

To see detailed guides, view our Installation Guides and other product resources:
Grayne: http://grayne.com/resources/

Foundry: http://www.foundrysiding.com/product-resources